Everything You Need to Know About Sump Pump Basin Extension

When it comes to protecting your home from flooding, a sump pump is necessary. But did you know that you can further protect your home by installing a sump pump basin extension?

Sump pump basins come in different shapes and sizes, but they all serve the same purpose: to collect water and prevent flooding. A basin extension is simply a vertical add-on extension that helps increase the capacity of your sump pump basin.

This article will tell you everything you need to know about sump pump basin extensions, including how they work and why you need one.

What is a Sump Pump Basin Extension?

A sump pump basin extension is a pipe that connects your sump pump to the sewer or storm drain. This allows your sump pump to discharge water away from your home, preventing flooding.

Most sump pump basins are made of concrete, plastic, or metal. The size of your basin will depend on the size of your home and the amount of water you need to discharge.

A basin extension is a vertical pipe attached to your sump pump basin. The extension increases the height of the basin, allowing it to hold more water.

Why Do I Need a Sump Pump Basin Extension?

Not every household needs a basin extension. However, if your home is located in an area with a high water table, you may need an extension to prevent your basement from flooding.

A sump pump basin extension is also necessary if your municipality requires that all stormwater be discharged into the sewer system. Discharging stormwater into the ground can lead to groundwater contamination.

How Does a Sump Pump Basin Extension Work?

A sump pump basin extension connects your sump pump to the sewer or storm drain. This allows your sump pump to discharge water away from your home, preventing flooding.

The extension increases the height of the basin, allowing it to hold more water. This is especially helpful in areas with high water tables or heavy rainfall.

How to Install a Basin Extension?

Installing a basin extension is a relatively simple process. First, you’ll need to purchase an extension kit from your local hardware store.

Next, you’ll need to dig a hole next to your sump pump basin. The hole should be large enough to accommodate the extension kit.

Once the hole is dug, you can assemble the extension kit and attach it to your sump pump basin. Finally, you’ll need to backfill the hole and ensure that the extension is secure.

Frequently Asked Questions

Is it OK to drill holes in the sump pump basin?

Yes, you can drill holes in the sump pump basin to attach the extension kit. However, make sure that the holes are not too big or they may cause the basin to leak.

Can I install a basin extension myself?

Yes, you can install a basin extension yourself. However, it’s always best to consult with a professional before undertaking any home improvement project.

What size sump pump basin should I use?

The size of your sump pump basin will depend on the size of your home and the amount of water you need to discharge. Most homes will require a basin that is at least 30 gallons. The typical pit is 30 inches deep and 18 to 24 inches broad.

Can I use a 5-gallon bucket for a sump pump basin?

No, a 5-gallon bucket will not be large enough to hold all the water your sump pump will need to discharge. A basin extension is necessary to increase the capacity of your sump pump basin.

How do I build a sump pump basin?

Building a sump pump basin is a relatively simple process. First, you’ll need to purchase a basin kit from your local hardware store. Next, you’ll need to dig a hole in your basement or crawlspace. The hole should be large enough to accommodate the basin kit. Once the hole is dug, you can assemble the basin kit and attach it to your sump pump. Finally, you’ll need to backfill the hole and ensure that the basin is secure.

Why does my sump pump keep running?

There are several reasons why your sump pump might keep running. First, check to see if anything is blocking the discharge pipe. If the pipe is blocked, water will build up in the basin and cause the pump to run continuously. Second, check the float switch to see if it is stuck in the “on” position. If the float switch is stuck, the pump will continue to run even when there is no water in the basin. Finally, check the pit to see if it is filled with water. If the pit is full of water, the pump will need to work harder to discharge the water and will eventually overheat.

How often should I test my sump pump?

You should test your sump pump once a year to ensure that it is working properly. To test your sump pump, fill the pit with water and make sure that the pump turns on. Then, turn off the power to the pump and make sure that the float switch is working properly. Finally, turn on the power to the pump and ensure that it discharges the water from the pit.

What are some common problems with sump pumps?

Some common problems with sump pumps include:

  • The pump will not turn on
  • The pump will not shut off
  • The float switch is stuck in the “on” position
  • The discharge pipe is blocked
  • The pit is full of water

Final Words

A sump pump basin extension is a pipe that connects your sump pump to the sewer or storm drain. This allows your sump pump to discharge water away from your home, preventing flooding.

Most sump pump basins are made of concrete, plastic, or metal. The size of your basin will depend on the size of your home and the amount of water you need to discharge.

We hope this article has been helpful. If you have any questions, please feel free to comment below.

Tags:

Sump Pump Advisor
Logo